JS Polynesian MESH Stencil

This very popular Pasifika stencil was commissioned by Janine Streeter of Temptation Cakes and you can see her finished cake here as a normal stencil.
Mesh stencils have no bridging so all lines are complete and joined where necessary.

Design Sizes : 
JS Poly: 4” x 11.02” - 101.6mm x 280.0mm- The design is repeatable and is designed to fit end to end
Frangipani: 4” x 10.38” - 101.6mm x 263.7mm - Repeatable

BEST Airbrushed or Petal/Metal Dusts used for this design. Buttercream NOT recommended. Use the normal stencil here

The normal ibicci Cake Stencils measure approximately 11.75"x8.25” / 30x21cm and most designs are cut to allow the stencils to be trimmed as required for placement on the sides and/or tops of cakes. Strip style cake Mesh stencils may be smaller in height. These stencils should be trimmed with a metal ruler and cutting blade.

Care: Rinse gently with warm water, Do Not use hot water as this may cause warping. Lay flat to dry either smoothing in a clean tea towel or pat dry with paper towels. Ensure they are fully dry before storing. An iron may be used on a very low setting to flatten mesh stencils but care must be taken.